基于高斯烟羽模型的船舶尾气扩散研究     

付金宇  李颖 《海洋通报》2018,(2):235-240

为有效对港区大气污染进行治理、分析船舶尾气,本文详细介绍了一种基于高斯烟羽模型,通过MATLAB模拟仿真模型,其包括实验仿真过程、技术原理及理论模型对船舶尾气扩散进行的研究。该模型是在传统的高斯烟羽模型的基础上,通过对实源像源进行加权选择输入参数;通过矢量合成确定了气体扩散的方向,利用合成后的"风速"进行计算仿真,有效模拟了船舶尾气在港区或者海洋环境中的气体扩散模型。其模型简单且可以有效模拟船舶尾气扩散。并且进一步对后续模型的精确优化进行分析。  相似文献   

Solution for a plane strain rough‐walled hydraulic fracture driven by turbulent fluid through impermeable rock          下载免费PDF全文

N. Zolfaghari  E. Dontsov  A. P. Bunger 《国际地质力学数值与分析法杂志》2018,42(4):587-617

The impact of turbulent flow on plane strain fluid‐driven crack propagation is an important but still poorly understood consideration in hydraulic fracture modeling. The changes that hydraulic fracturing has experienced over the past decade, especially in the area of fracturing fluids, have played a major role in the transition of the typical fluid regime from laminar to turbulent flow. Motivated by the increasing preponderance of high‐rate, water‐driven hydraulic fractures with high Reynolds number, we present a semianalytical solution for the propagation of a plane strain hydraulic fracture driven by a turbulent fluid in an impermeable formation. The formulation uses a power law relationship between the Darcy‐Weisbach friction factor and the scale of the fracture roughness, where one specific manifestation of this generalized friction factor is the classical Gauckler‐Manning‐Strickler approximation for turbulent flow in a rough‐walled channel. Conservation of mass, elasticity, and crack propagation are also solved simultaneously. We obtain a semianalytical solution using an orthogonal polynomial series. An approximate closed‐form solution is enabled by a choice of orthogonal polynomials embedding the near‐tip asymptotic behavior and thus giving very rapid convergence; a precise solution is obtained with 2 terms of the series. By comparison with numerical simulations, we show that the transition region between the laminar and turbulent regimes can be relatively small so that full solutions can often be well approximated by either a fully laminar or fully turbulent solution.  相似文献   

A MESO-β SCALE SIMULATION OF THE EFFECTS OF BOREAL FOREST ECOSYSTEM ON THE LOWER ATMOSPHERE     

王汉杰  Yi-FanLI  AloysiusK.LO 《Acta Meteorologica Sinica》2001,(1)

Based on the Intensive Field Campaign(IFC-1)data of Boreal Ecosystem-Atmosphere Study(BOREAS).a three-dimensional meso-β scale model is used to simulate the effect of boreal forests onthe lower atmosphere.A fine horizontal resolution of 2 km×2 km is used in order to distinguish thevegetative heterogeneity in the boreal region.A total of 20×25 grid points cover the entire sub-modeling area in BOREAS' South Study Area(SSA).The ecosystem types and their coverage ineach grid square are extracted from the North American Land Cover Characteristics Data Base(NALCCD)generated by the U.S.Geographical Survey(USGS)and the University of Nebraska-Lincoln(UNL).The topography of the study area is taken from the Digital Elevation Map(DEM)of USGS.The model outputs include the components of the energy balance budget within the canopyand at the ground.the turbulence parameters in the atmospheric boundary layer and the wind.temperature and humidity profiles extending up to a height of 1500 m.In addition to the fine timeand spatial step,the unique feature of the present model is the incorporation of both dynamic andbiological effects of the Boreal forest into the model parameterization scheme.The model resultscompare favorably with BOREAS' IFC-1 data in 1994 when the forest was in the luxuriant growingperiod.  相似文献   

Ambipolar diffusion in the solar atmosphere     

S. M. Chitre  V. Krishan 《Monthly notices of the Royal Astronomical Society》2001,323(2):L23-L25

The process of non-linear ambipolar diffusion in the region overlying the solar surface can be an effective mechanism for producing sharp magnetic structures and current sheets. These may be the sites responsible for the occurrence of connectivity of magnetic field lines, and the subsequent explosive input of energy for heating of some of the features in the atmosphere of the Sun..  相似文献   

MONITORING THE DIFFUSION OF SUSPENDED SEDIMENTS AND STABILITY OF TIDAL RADIAL SAND RIDGES AREA USING MULTI-SATELLITE REMOTE SENSING DATA     

黄海军  何宜军 《中国海洋湖沼学报》2001,19(4):361-367

Nine Landsat TM tapes and images and MSS images, 10 NOAA tapes and images and 1 SAR image from 1973 to 1997 were used to analyse the diffusion of suspended sediments and the change of tidal radial sand ridges in the northern part of the Changjiang River delta, the South Yellow Sea. The results showed that the diffusion of suspended sediments was controlled by the tide, net current, and submarine topography in this area. The distribution of suspended sediments had close relationship with thesubmarine topography. The old Huanghe River delta and the Changjiang River comprise the main sediment supply for the formation of radial sand ridges, whose evolution can be divided into three stages since the Huangbe River changed its course and flowed northward into the Bohai Sea.  相似文献   

Studying Hydrodynamic Instability Using Shock-Tube Experiments     

O. Sadot  K. Levy  A. Yosef-Hai  D. Cartoon  Y. Elbaz  Y. Srebro  G. Ben-Dor  D. Shvarts 《Astrophysics and Space Science》2005,298(1-2):305-312

The hydrodynamic instability, which develops on the contact surface between two fluids, has great importance in astrophysical phenomena such as the inhomogeneous density distribution following a supernova event. In this event acceleration waves pass across a material interface and initiate and enhance unstable conditions in which small perturbations grow dramatically. In the present study, an experimental technique aimed at investigating the above-mentioned hydrodynamic instability is presented. The experimental investigation is based on a shock-tube apparatus by which a shock wave is generated and initiates the instability that develops on the contact surface between two gases. The flexibility of the system enables one to vary the initial shape of the contact surface, the shock-wave Mach number, and the density ratio across the contact surface. Three selected sets of shock-tube experiments are presented in order to demonstrate the system capabilities: (1) large-initial amplitudes with low-Mach-number incident shock waves; (2) small-initial amplitudes with moderate-Mach-number incident shock waves; and (3) shock bubble interaction. In the large-amplitude experiments a reduction of the initial velocity with respect to the linear growth prediction was measured. The results were compared to those predicted by a vorticity-deposition model and to previous experiments with moderate- and high-Mach number incident shock waves that were conducted by others. In this case, a reduction of the initial velocity was noted. However, at late times the growth rate had a 1/t behavior as in the small-amplitude low-Mach number case. In the small-amplitude moderate-Mach number shock experiments a reduction from the impulsive theory was noted at the late stages. The passage of a shock wave through a spherical bubble results in the formation of a vortex ring. Simple dimensional analysis shows that the circulation depends linearly on the speed of sound of the surrounding material and on the initial bubble radius.  相似文献   

Sediment transport in analogue flume models compared with real‐world sedimentary systems: a new look at scaling evolution of sedimentary systems in a flume     

G. POSTMA  M. G. KLEINHANS  P. TH. MEIJER  J. T. EGGENHUISEN 《Sedimentology》2008,55(6):1541-1557

Evolution of sedimentary systems at large temporal and spatial scales cannot be scaled down to laboratory dimensions by conventional hydraulic Froude scaling. Therefore, many researchers question the validity of experiments aiming to simulate this evolution. Yet, it has been shown that laboratory experiments yield stratigraphic responses to allocyclic forcing that are remarkably similar to those in real‐world prototypes, hinting at scale independency with strong dependence on boundary conditions but weak dependence on the actual sediment transport dynamics. This paper addresses the dilemma by contrasting sediment transport rules that apply in the laboratory with those that apply in real‐world geological systems. It is demonstrated that the generation of two‐dimensional stratigraphy in a flume can be simulated numerically by the non‐linear diffusion equation. Sediment transport theory is used to demonstrate that only suspension‐dominated meandering rivers should be simulated with linear diffusion. With increasing grain‐size (coarse sand to gravel) and shallowness of river systems, the prediction of long‐term transport must be simulated by non‐linear, slope‐dependent diffusion to allow for increasing transport rates and thus change in stratigraphic style. To point out these differences in stratigraphic style, three stages in infill of accommodation have been defined here: (i) a start‐up stage, when the system is prograding to base level (e.g. the shelf edge) with no sediment flux beyond the base‐level point; (ii) a fill‐up stage, when the system is further aggrading while progressively more sediment is bypassing base level with the progression of the infill; and (iii) a keep‐up stage, when more than 90% of the input is bypassing the base level and less than 10% is used for filling the accommodation. By plotting the rate of change in flux for various degrees of non‐linearity (varying the exponent in the diffusion equation) it was found that the error between model and real‐world prototype is largest for the suspension‐dominated prototypes, although never more than 30% and only at the beginning of the fill‐up stage. The error reduces to only 10% for the non‐linear sandy‐gravelly and gravelly systems. These results are very encouraging and open up ways to calibrate numerical models of sedimentary system evolution by such experiments.  相似文献   

Asymmetrically zoned reaction rims: assessment of grain boundary diffusivities and growth rates related to natural diffusion-controlled mineral reactions   总被引：1，自引：0，他引：1  

L. M. KELLER  R. WIRTH  D. RHEDE  K. KUNZE  R. ABART 《Journal of Metamorphic Geology》2008,26(1):99-120

This study explores garnet coronas around hedenbergite, which were formed by the reaction plagioclase + hedenbergite→garnet + quartz, to derive information about diffusion paths that allowed for material redistribution during reaction progress. Whereas quartz forms disconnected single grains along the garnet/hedenbergite boundaries, garnet forms ～20‐μm‐wide continuous polycrystalline rims along former plagioclase/hedenbergite phase boundaries. Individual garnet crystals are separated by low‐angle grain boundaries, which commonly form a direct link between the reaction interfaces of the plagioclase|garnet|hedenbergite succession. Compositional variations in garnet involve: (i) an overall asymmetric compositional zoning in Ca, Fe²⁺, Fe³⁺ and Al across the garnet layer; and (ii) micron‐scale compositional variations in the near‐grain boundary regions and along plagioclase/garnet phase boundaries. These compositional variations formed during garnet rim growth. Thereby, transfer of the chemical components occurred by a combination of fast‐path diffusion along grain boundaries within the garnet rim, slow diffusion through the interior of the garnet grains, and by fast diffusion along the garnet/plagioclase and the garnet/hedenbergite phase boundaries. Numerical simulation indicates that diffusion of Ca, Al and Fe²⁺ occurred about three to four, four and six to seven orders of magnitude faster along the grain boundaries than through the interior of the garnet grains. Fast‐path diffusion along grain boundaries contributed substantially to the bulk material transfer across the growing garnet rim. Despite the contribution of fast‐path diffusion, bulk diffusion through the garnet rim was too slow to allow for chemical equilibration of the phases involved in garnet rim formation even on a micrometre scale. Based on published garnet volume diffusion data the growth interval of a 20‐μm‐wide garnet rim is estimated at ～10³–10⁴ years at the inferred reaction conditions of 760 ± 50 °C at 7.6 kbar. Using the same parameterization of the growth law, 100‐μm‐ and 1‐mm‐thick garnet rims would grow within 10⁵–10⁶ and 10⁶–10⁷ years respectively.  相似文献   

THERIA_G: a software program to numerically model prograde garnet growth   总被引：6，自引：4，他引：2  

F. Gaidies  C. de Capitani  R. Abart 《Contributions to Mineralogy and Petrology》2008,155(5):657-671

We present the software program THERIA_G, which allows for numerical simulation of garnet growth in a given volume of rock along any pressure–temperature–time (P–T–t) path. THERIA_G assumes thermodynamic equilibrium between the garnet rim and the rock matrix during growth and accounts for component fractionation associated with garnet formation as well as for intracrystalline diffusion within garnet. In addition, THERIA_G keeps track of changes in the equilibrium phase relations, which occur during garnet growth along the specified P–T–t trajectory. This is accomplished by the combination of two major modules: a Gibbs free energy minimization routine is used to calculate equilibrium phase relations including the volume and composition of successive garnet growth increments as P and T and the effective bulk rock composition change. With the second module intragranular multi-component diffusion is modelled for spherical garnet geometry. THERIA_G allows to simulate the formation of an entire garnet population, the nucleation and growth history of which is specified via the garnet crystal size frequency distribution. Garnet growth simulations with THERIA_G produce compositional profiles for the garnet porphyroblasts of each size class of a population and full information on equilibrium phase assemblages for any point along the specified P–T–t trajectory. The results of garnet growth simulation can be used to infer the P–T–t path of metamorphism from the chemical zoning of garnet porphyroblasts. With a hypothetical example of garnet growth in a pelitic rock we demonstrate that it is essential for the interpretation of the chemical zoning of garnet to account for the combined effects of the thermodynamic conditions of garnet growth, the nucleation history and intracrystalline diffusion. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.

F. GaidiesEmail:

  相似文献   

Possible Density Change of the Origin of North Pacific Intermediate Water Due to Double Diffusion in the Mixed Water Region     

Ryuichiro?InoueEmail author  Jiro?Yoshida 《Journal of Oceanography》2005,61(5):871-883

In this study we test Talley's hypothesis that Oyashio winter mixed-layer water (26.5–26.6σ _θ) increases its density to produce the North Pacific Intermediate Water (NPIW) salinity minimum (26.7– 26.8σ_θ) in the Mixed Water Region, assuming a combination of cabbeling and double diffusion. The possible density change of Oyashio winter mixed-layer water is discussed using an instantaneous ratio of the change of temperature and salinity along any particular intrusion (R _l ). We estimate the range of R _l ^DD required to convert Oyashio winter mixed-layer water to the NPIW salinity minimum due to double diffusion, and then assume double-diffusive intrusions as this conversion mechanism. A double-diffusive intrusion model is used to estimate R _l ^DD in a situation where salt fingering dominates vertical mixing, as well as to determine whether Oyashio winter mixed-layer water can become the NPIW salinity minimum. Possible density changes are estimated from the model R _l ^DD by assuming the amount of density change due to cabbeling. From these results, we conclude that Oyashio winter mixed-layer water contributes to a freshening of the lighter layer of the NPIW salinity minimum (around 26.70σ_θ) in the MWR.  相似文献